Continuer à lire
Tue, Apr 18, 2023
Mercedes eBikes vs ENVO Stax: examen complet
Tue, Mar 28, 2023
Obtenir un vélo électrique légal au Canada : règles et règlements
Produits susceptibles de vous plaire
Abonnez-vous à notre newsletter
Promotions, nouveautés et soldes. Directement dans votre boîte de réception.
3 commentaires
David Coldwell
My ebike battery manufacturer says not to run the battery below 32 volts and default on kit is set to 30 volts cutoff. Is there a way I can set the lcd3 to stop drawing power at 32 volts to avoid possible battery damage?
My ebike battery manufacturer says not to run the battery below 32 volts and default on kit is set to 30 volts cutoff. Is there a way I can set the lcd3 to stop drawing power at 32 volts to avoid possible battery damage?
David
Is there an internal view of the hub? Have a similar one that I need to disassemble to have bearings changed.
Is there an internal view of the hub? Have a similar one that I need to disassemble to have bearings changed.
Robert May
Hi, Folks. My grandson has a CCM Brut 4.0 Hardtail Mountain Bike, 26-in (071-1739-8). The bike has oversized 4" fat tires and, therefore, oversized wheel rims. I’d like to know if you have a 350W conversion kit that could be installed on this bike without interfering with the ability to continue to use it as and 8 speed peddle bike.
Cheers,
Bob
Hi, Folks. My grandson has a CCM Brut 4.0 Hardtail Mountain Bike, 26-in (071-1739-8). The bike has oversized 4" fat tires and, therefore, oversized wheel rims. I’d like to know if you have a 350W conversion kit that could be installed on this bike without interfering with the ability to continue to use it as and 8 speed peddle bike.
Cheers,
Bob