Deal Active For You
LCD3 48V 25A Controller System
LCD3 48V 25A Controller System
Local Pickup
1685 Ingleton Ave
Burnaby BC V5C 3V6
Canadá
Adapt to Your Lifestyle
Why Choose Pre-Owned?
- Big Savings: Save $680 compared to new.
- Like-New Performance: Each bike is professionally serviced for reliability.
- Warranty Options: Add a 1-year warranty for just $90.
Limited Stock – Act Now!
500 W
28 kg
32 km/hr
150 km
750 W
28 kg
45 km/hr
100 km
Specifications
- LCD display and computer,
- Motor Controller 48V 25A,
- Thumb Throttle,
- Pedal Assist Sensor,
- Brake cut-off magnetic switches,
- Rain proof Controller and tools bag,
- Zip ties, cable shield and installation accessories
- LCD3 meter provide you with a variety of functions such as vehicle controls and vehicle status digitized displays to meet the trip demands.
- Pedal Assist System (PAS) optimized to simulate the torque sensor. This computing system provides Speed limit PAS or Torque limit PAS levels from 0 to 5.
- Trip time display (with displays of a single trip time (TM) and total trip time (TTM));
- Trip speed display (with displays of real-time speed (Km/H or MPH) and a single maximum speed (MXS) and a single average speed (AVS));
- Trip distance display (with displays of a single trip distance (DST) and total trip distance (ODO));
- Display of turned on handlebar;
- Display of power-assist startup;
- Power assistant ratio (or handlebar) gear (ASSIST) switch;
- 6Km/H power assistant push function;
- Cruise function (CRUISE);
- Battery capacity indicator;
- Real-time battery voltage (VOL) display;
- Motor power and temperature (MOTOR) display;
- Brake display;
- Turn on backlighting and lights ;
- Environment temperature display;
- Data clearing;
- Fault code display;
- User parameter setting
- 5' large screen
- Rubber clamp spacer is provided for 3 handlebar bore sizes: 22.5mm, 25.4mm, 31.5mm
- easy key button, easy control,
- waterproof housing with good appearance
- Brushless Motor Controller
- Voltage: 48V
- Min Voltage: 42+-0.5V
- Max Current: 25+-1A
- Speed Set: 1-4.2V
- Angle: 120
- Brake Input: Low-Level
- Haul effect sensor, Analogue linear increasing torque
- 2 pieces 12 Magnet easy assemble Pedal Assist Sensor,
- Just stick the sensor, no need to disassemble the crank.
- this sensor is compatible with optimized PAS controlling systems and provide the best pedal assist performance, rapid response and torque sensor simulation.
- Just stick the magnet sensors, no need to disassemble the brake levers.
- it cuts-off the motor when you brake
--
Interface:
Motor Controller:
Thumb Throttle:
Pedal Assist Sensor
Brake cut-off magnetic switches
Rain proof Controller and tools bag,
With D50 you can easily switch between Class 1, Class2, or Class 3 e-bike modes, giving you the freedom to tune your eBike to the maximum performance allowed under the law.
Ultimate performance, yet street legal
With Class 1 and Class 2, you can enjoy a whopping 150km of range at PAS 1, allowing you to travel further than ever before. Meanwhile, Class 3 offers up to 750W nominal power and a top speed of 45km/h / 28mph/90+ miles, giving you a thrilling and exhilarating ride that will leave you feeling alive.
You may wonder - what is the performance of the used e-bike?
The bike may give you slightly lesser performance depending on the existing range on the battery. However, all the used bikes that we are selling are thoroughly quality-checked, usually low mileage, and in excellent condition. So, you don’t need to worry about the range or overall reliability—they are ready for your next adventure!
These demo bikes are available in limited quantities. Don’t miss your chance to own an ENVO D50 at an unbeatable price! Visit us at EbikeBC to learn more.
Our used D50 models, part of our test-ride fleet, are fully serviced before sale. These bikes offer exceptional value with minimal wear and are ready for your next adventure.