Error info 1 - throttle abnormality

If you are facing the error 1 on your LCD3 Display please follow the following troubleshooting advice and hopefully it will resolve the issue.

- Make sure the throttle level is in ideal state and don’t apply throttle while booting up system.

- Check the cables, wire can be stretched or damaged or the three-pin throttle connector could have been damaged.

- Check the 9-pin connector on the controller side. The pins are bend when not inserted correctly.

We're Happy to help:

Still can't find the solution?

1. Please fill up the support form at the link below:


2. Connect with our agents through live chats